Product Specifications:
01.Sensing Distance: | >40mm |
02.Shell Material: | Aluminum alloy |
03.Contact Mode: | NC (normally closed) |
04.Maximum Contact Rated Power: | 10W |
05.Maximum Switching Voltage: | DC100V |
06.Contact Resistance: | ≦0.1Ω |
07.Fixing Method: | Screws |
08.Maximum Limit Current: | 0.5A |
09.Screws Weight: | 5g |
10.Connection Wire: | 27cm |
11.The Upper Part Dimension: | 50*18*10mm |
12.The Next Part Dimension: | 50*18*10mm |
13.The Upper Part Weight: | 23g |
14.The Next Part Weight: | 28g |
Feature:
1. Aluminium alloy housing for long time use
2. Using USA made sensor in order for stability performance
Installation Notes:
1. The magnet part is mounted on a movable door or window, and the switch part is mounted on the frame of the door or window
2. The two parts of the magnetic switch and the switch must be arranged side by side, not dislocation, the distance between the two parts should be less than 5mm, equal to 0 is the most ideal state, if the distance between the two parts is greater than the moving distance of the product after installation, the product will lose its effect.
3. The magnetic switch should be installed in a place that is not easily accessible to humans or animals, such as the top or upper part;